This introduces an experimental `--output-last-message` flag that can be
used to identify a file where the final message from the agent will be
written. Two use cases:
- Ultimately, we will likely add a `--quiet` option to `exec`, but even
if the user does not want any output written to the terminal, they
probably want to know what the agent did. Writing the output to a file
makes it possible to get that information in a clean way.
- Relatedly, when using `exec` in CI, it is easier to review the
transcript written "normally," (i.e., not as JSON or something with
extra escapes), but getting programmatic access to the last message is
likely helpful, so writing the last message to a file gets the best of
both worlds.
I am calling this "experimental" because it is possible that we are
overfitting and will want a more general solution to this problem that
would justify removing this flag.
For now, this removes the `#[non_exhaustive]` directive on `EventMsg` so
that we are forced to handle all `EventMsg` by default. (We may revisit
this if/when we publish `core/` as a `lib` crate.) For now, it is
helpful to have this as a forcing function because we have effectively
two UIs (`tui` and `exec`) and usually when we add a new variant to
`EventMsg`, we want to be sure that we update both.
https://github.com/openai/codex/pull/922 did this for the
`SessionConfigured` enum variant, and I think it is generally helpful to
be able to work with the values as each enum variant as their own type,
so this converts the remaining variants and updates all of the
callsites.
Added a simple unit test to verify that the JSON-serialized version of
`Event` does not have any unexpected nesting.
Adds `expect()` as a denied lint. Same deal applies with `unwrap()`
where we now need to put `#[expect(...` on ones that we legit want. Took
care to enable `expect()` in test contexts.
# Tests
```
cargo fmt
cargo clippy --all-features --all-targets --no-deps -- -D warnings
cargo test
```
When using Codex to develop Codex itself, I noticed that sometimes it
would try to add `#[ignore]` to the following tests:
```
keeps_previous_response_id_between_tasks()
retries_on_early_close()
```
Both of these tests start a `MockServer` that launches an HTTP server on
an ephemeral port and requires network access to hit it, which the
Seatbelt policy associated with `--full-auto` correctly denies. If I
wasn't paying attention to the code that Codex was generating, one of
these `#[ignore]` annotations could have slipped into the codebase,
effectively disabling the test for everyone.
To that end, this PR enables an experimental environment variable named
`CODEX_SANDBOX_NETWORK_DISABLED` that is set to `1` if the
`SandboxPolicy` used to spawn the process does not have full network
access. I say it is "experimental" because I'm not convinced this API is
quite right, but we need to start somewhere. (It might be more
appropriate to have an env var like `CODEX_SANDBOX=full-auto`, but the
challenge is that our newer `SandboxPolicy` abstraction does not map to
a simple set of enums like in the TypeScript CLI.)
We leverage this new functionality by adding the following code to the
aforementioned tests as a way to "dynamically disable" them:
```rust
if std::env::var(CODEX_SANDBOX_NETWORK_DISABLED_ENV_VAR).is_ok() {
println!(
"Skipping test because it cannot execute when network is disabled in a Codex sandbox."
);
return;
}
```
We can use the `debug seatbelt --full-auto` command to verify that
`cargo test` fails when run under Seatbelt prior to this change:
```
$ cargo run --bin codex -- debug seatbelt --full-auto -- cargo test
---- keeps_previous_response_id_between_tasks stdout ----
thread 'keeps_previous_response_id_between_tasks' panicked at /Users/mbolin/.cargo/registry/src/index.crates.io-1949cf8c6b5b557f/wiremock-0.6.3/src/mock_server/builder.rs:107:46:
Failed to bind an OS port for a mock server.: Os { code: 1, kind: PermissionDenied, message: "Operation not permitted" }
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
failures:
keeps_previous_response_id_between_tasks
test result: FAILED. 0 passed; 1 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
error: test failed, to rerun pass `-p codex-core --test previous_response_id`
```
Though after this change, the above command succeeds! This means that,
going forward, when Codex operates on Codex itself, when it runs `cargo
test`, only "real failures" should cause the command to fail.
As part of this change, I decided to tighten up the codepaths for
running `exec()` for shell tool calls. In particular, we do it in `core`
for the main Codex business logic itself, but we also expose this logic
via `debug` subcommands in the CLI in the `cli` crate. The logic for the
`debug` subcommands was not quite as faithful to the true business logic
as I liked, so I:
* refactored a bit of the Linux code, splitting `linux.rs` into
`linux_exec.rs` and `landlock.rs` in the `core` crate.
* gating less code behind `#[cfg(target_os = "linux")]` because such
code does not get built by default when I develop on Mac, which means I
either have to build the code in Docker or wait for CI signal
* introduced `macro_rules! configure_command` in `exec.rs` so we can
have both sync and async versions of this code. The synchronous version
seems more appropriate for straight threads or potentially fork/exec.
This is a substantial PR to add support for the chat completions API,
which in turn makes it possible to use non-OpenAI model providers (just
like in the TypeScript CLI):
* It moves a number of structs from `client.rs` to `client_common.rs` so
they can be shared.
* It introduces support for the chat completions API in
`chat_completions.rs`.
* It updates `ModelProviderInfo` so that `env_key` is `Option<String>`
instead of `String` (for e.g., ollama) and adds a `wire_api` field
* It updates `client.rs` to choose between `stream_responses()` and
`stream_chat_completions()` based on the `wire_api` for the
`ModelProviderInfo`
* It updates the `exec` and TUI CLIs to no longer fail if the
`OPENAI_API_KEY` environment variable is not set
* It updates the TUI so that `EventMsg::Error` is displayed more
prominently when it occurs, particularly now that it is important to
alert users to the `CodexErr::EnvVar` variant.
* `CodexErr::EnvVar` was updated to include an optional `instructions`
field so we can preserve the behavior where we direct users to
https://platform.openai.com if `OPENAI_API_KEY` is not set.
* Cleaned up the "welcome message" in the TUI to ensure the model
provider is displayed.
* Updated the docs in `codex-rs/README.md`.
To exercise the chat completions API from OpenAI models, I added the
following to my `config.toml`:
```toml
model = "gpt-4o"
model_provider = "openai-chat-completions"
[model_providers.openai-chat-completions]
name = "OpenAI using Chat Completions"
base_url = "https://api.openai.com/v1"
env_key = "OPENAI_API_KEY"
wire_api = "chat"
```
Though to test a non-OpenAI provider, I installed ollama with mistral
locally on my Mac because ChatGPT said that would be a good match for my
hardware:
```shell
brew install ollama
ollama serve
ollama pull mistral
```
Then I added the following to my `~/.codex/config.toml`:
```toml
model = "mistral"
model_provider = "ollama"
```
Note this code could certainly use more test coverage, but I want to get
this in so folks can start playing with it.
For reference, I believe https://github.com/openai/codex/pull/247 was
roughly the comparable PR on the TypeScript side.
https://github.com/openai/codex/pull/855 added the clippy warning to
disallow `unwrap()`, but apparently we were not verifying that tests
were "clippy clean" in CI, so I ended up with a lot of local errors in
VS Code.
This turns on the check in CI and fixes the offenders.
This is the first step in supporting other model providers in the Rust
CLI. Specifically, this PR adds support for the new entries in `Config`
and `ConfigOverrides` to specify a `ModelProviderInfo`, which is the
basic config needed for an LLM provider. This PR does not get us all the
way there yet because `client.rs` still categorically appends
`/responses` to the URL and expects the endpoint to support the OpenAI
Responses API. Will fix that next!
I discovered that I accidentally introduced a change in
https://github.com/openai/codex/pull/829 where we load a fresh `Config`
in the middle of `codex.rs`:
c3e10e180a/codex-rs/core/src/codex.rs (L515-L522)
This is not good because the `Config` could differ from the one that has
the user's overrides specified from the CLI. Also, in unit tests, it
means the `Config` was picking up my personal settings as opposed to
using a vanilla config, which was problematic.
This PR cleans things up by moving the common case where
`Op::ConfigureSession` is derived from `Config` (originally done in
`codex_wrapper.rs`) and making it the standard way to initialize `Codex`
by putting it in `Codex::spawn()`. Note this also eliminates quite a bit
of boilerplate from the tests and relieves the caller of the
responsibility of minting out unique IDs when invoking `submit()`.
Some effects of this change:
- New formatting changes across many files. No functionality changes
should occur from that.
- Calls to `set_env` are considered unsafe, since this only happens in
tests we wrap them in `unsafe` blocks
In order to expose Codex via an MCP server, I realized that we should be
taking `cwd` as a parameter rather than assuming
`std::env::current_dir()` as the `cwd`. Specifically, the user may want
to start a session in a directory other than the one where the MCP
server has been started.
This PR makes `cwd: PathBuf` a required field of `Session` and threads
it all the way through, though I think there is still an issue with not
honoring `workdir` for `apply_patch`, which is something we also had to
fix in the TypeScript version: https://github.com/openai/codex/pull/556.
This also adds `-C`/`--cd` to change the cwd via the command line.
To test, I ran:
```
cargo run --bin codex -- exec -C /tmp 'show the output of ls'
```
and verified it showed the contents of my `/tmp` folder instead of
`$PWD`.
With this change, you can specify a program that will be executed to get
notified about events generated by Codex. The notification info will be
packaged as a JSON object. The supported notification types are defined
by the `UserNotification` enum introduced in this PR. Initially, it
contains only one variant, `AgentTurnComplete`:
```rust
pub(crate) enum UserNotification {
#[serde(rename_all = "kebab-case")]
AgentTurnComplete {
turn_id: String,
/// Messages that the user sent to the agent to initiate the turn.
input_messages: Vec<String>,
/// The last message sent by the assistant in the turn.
last_assistant_message: Option<String>,
},
}
```
This is intended to support the common case when a "turn" ends, which
often means it is now your chance to give Codex further instructions.
For example, I have the following in my `~/.codex/config.toml`:
```toml
notify = ["python3", "/Users/mbolin/.codex/notify.py"]
```
I created my own custom notifier script that calls out to
[terminal-notifier](https://github.com/julienXX/terminal-notifier) to
show a desktop push notification on macOS. Contents of `notify.py`:
```python
#!/usr/bin/env python3
import json
import subprocess
import sys
def main() -> int:
if len(sys.argv) != 2:
print("Usage: notify.py <NOTIFICATION_JSON>")
return 1
try:
notification = json.loads(sys.argv[1])
except json.JSONDecodeError:
return 1
match notification_type := notification.get("type"):
case "agent-turn-complete":
assistant_message = notification.get("last-assistant-message")
if assistant_message:
title = f"Codex: {assistant_message}"
else:
title = "Codex: Turn Complete!"
input_messages = notification.get("input_messages", [])
message = " ".join(input_messages)
title += message
case _:
print(f"not sending a push notification for: {notification_type}")
return 0
subprocess.check_output(
[
"terminal-notifier",
"-title",
title,
"-message",
message,
"-group",
"codex",
"-ignoreDnD",
"-activate",
"com.googlecode.iterm2",
]
)
return 0
if __name__ == "__main__":
sys.exit(main())
```
For reference, here are related PRs that tried to add this functionality
to the TypeScript version of the Codex CLI:
* https://github.com/openai/codex/pull/160
* https://github.com/openai/codex/pull/498
Previous to this PR, `SandboxPolicy` was a bit difficult to work with:
237f8a11e1/codex-rs/core/src/protocol.rs (L98-L108)
Specifically:
* It was an `enum` and therefore options were mutually exclusive as
opposed to additive.
* It defined things in terms of what the agent _could not_ do as opposed
to what they _could_ do. This made things hard to support because we
would prefer to build up a sandbox config by starting with something
extremely restrictive and only granting permissions for things the user
as explicitly allowed.
This PR changes things substantially by redefining the policy in terms
of two concepts:
* A `SandboxPermission` enum that defines permissions that can be
granted to the agent/sandbox.
* A `SandboxPolicy` that internally stores a `Vec<SandboxPermission>`,
but externally exposes a simpler API that can be used to configure
Seatbelt/Landlock.
Previous to this PR, we supported a `--sandbox` flag that effectively
mapped to an enum value in `SandboxPolicy`. Though now that
`SandboxPolicy` is a wrapper around `Vec<SandboxPermission>`, the single
`--sandbox` flag no longer makes sense. While I could have turned it
into a flag that the user can specify multiple times, I think the
current values to use with such a flag are long and potentially messy,
so for the moment, I have dropped support for `--sandbox` altogether and
we can bring it back once we have figured out the naming thing.
Since `--sandbox` is gone, users now have to specify `--full-auto` to
get a sandbox that allows writes in `cwd`. Admittedly, there is no clean
way to specify the equivalent of `--full-auto` in your `config.toml`
right now, so we will have to revisit that, as well.
Because `Config` presents a `SandboxPolicy` field and `SandboxPolicy`
changed considerably, I had to overhaul how config loading works, as
well. There are now two distinct concepts, `ConfigToml` and `Config`:
* `ConfigToml` is the deserialization of `~/.codex/config.toml`. As one
might expect, every field is `Optional` and it is `#[derive(Deserialize,
Default)]`. Consistent use of `Optional` makes it clear what the user
has specified explicitly.
* `Config` is the "normalized config" and is produced by merging
`ConfigToml` with `ConfigOverrides`. Where `ConfigToml` contains a raw
`Option<Vec<SandboxPermission>>`, `Config` presents only the final
`SandboxPolicy`.
The changes to `core/src/exec.rs` and `core/src/linux.rs` merit extra
special attention to ensure we are faithfully mapping the
`SandboxPolicy` to the Seatbelt and Landlock configs, respectively.
Also, take note that `core/src/seatbelt_readonly_policy.sbpl` has been
renamed to `codex-rs/core/src/seatbelt_base_policy.sbpl` and that
`(allow file-read*)` has been removed from the `.sbpl` file as now this
is added to the policy in `core/src/exec.rs` when
`sandbox_policy.has_full_disk_read_access()` is `true`.
This changes how instantiating `Config` works and also adds
`approval_policy` and `sandbox_policy` as fields. The idea is:
* All fields of `Config` have appropriate default values.
* `Config` is initially loaded from `~/.codex/config.toml`, so values in
`config.toml` will override those defaults.
* Clients must instantiate `Config` via
`Config::load_with_overrides(ConfigOverrides)` where `ConfigOverrides`
has optional overrides that are expected to be settable based on CLI
flags.
The `Config` should be defined early in the program and then passed
down. Now functions like `init_codex()` take fewer individual parameters
because they can just take a `Config`.
Also, `Config::load()` used to fail silently if `~/.codex/config.toml`
had a parse error and fell back to the default config. This seemed
really bad because it wasn't clear why the values in my `config.toml`
weren't getting picked up. I changed things so that
`load_with_overrides()` returns `Result<Config>` and verified that the
various CLIs print a reasonable error if `config.toml` is malformed.
Finally, I also updated the TUI to show which **sandbox** value is being
used, as we do for other key values like **model** and **approval**.
This was also a reminder that the various values of `--sandbox` are
honored on Linux but not macOS today, so I added some TODOs about fixing
that.
This adds support for the `--disable-response-storage` flag across our
multiple Rust CLIs to support customers who have opted into Zero-Data
Retention (ZDR). The analogous changes to the TypeScript CLI were:
* https://github.com/openai/codex/pull/481
* https://github.com/openai/codex/pull/543
For a client using ZDR, `previous_response_id` will never be available,
so the `input` field of an API request must include the full transcript
of the conversation thus far. As such, this PR changes the type of
`Prompt.input` from `Vec<ResponseInputItem>` to `Vec<ResponseItem>`.
Practically speaking, `ResponseItem` was effectively a "superset" of
`ResponseInputItem` already. The main difference for us is that
`ResponseItem` includes the `FunctionCall` variant that we have to
include as part of the conversation history in the ZDR case.
Another key change in this PR is modifying `try_run_turn()` so that it
returns the `Vec<ResponseItem>` for the turn in addition to the
`Vec<ResponseInputItem>` produced by `try_run_turn()`. This is because
the caller of `run_turn()` needs to record the `Vec<ResponseItem>` when
ZDR is enabled.
To that end, this PR introduces `ZdrTranscript` (and adds
`zdr_transcript: Option<ZdrTranscript>` to `struct State` in `codex.rs`)
to take responsibility for maintaining the conversation transcript in
the ZDR case.
As stated in `codex-rs/README.md`:
Today, Codex CLI is written in TypeScript and requires Node.js 22+ to
run it. For a number of users, this runtime requirement inhibits
adoption: they would be better served by a standalone executable. As
maintainers, we want Codex to run efficiently in a wide range of
environments with minimal overhead. We also want to take advantage of
operating system-specific APIs to provide better sandboxing, where
possible.
To that end, we are moving forward with a Rust implementation of Codex
CLI contained in this folder, which has the following benefits:
- The CLI compiles to small, standalone, platform-specific binaries.
- Can make direct, native calls to
[seccomp](https://man7.org/linux/man-pages/man2/seccomp.2.html) and
[landlock](https://man7.org/linux/man-pages/man7/landlock.7.html) in
order to support sandboxing on Linux.
- No runtime garbage collection, resulting in lower memory consumption
and better, more predictable performance.
Currently, the Rust implementation is materially behind the TypeScript
implementation in functionality, so continue to use the TypeScript
implmentation for the time being. We will publish native executables via
GitHub Releases as soon as we feel the Rust version is usable.
